Minimum specifications - Impero Workplace Pro

Impero Workplace Pro System Requirements for Installation

Impero Workplace Pro Minimum System Requirements for Installation

Before we get you set up on Impero workplace Pro, make sure that you meet the minimum system requirements. This document takes you through everything you require to verify your end, to help ensure that you can run Impero Workplace Pro effectively on your network.

Hosting Impero workplace Pro on a local server

Make sure your local server meets the following demands:

• Supports 32bit and 64bit Architecture
• Microsoft Windows 7, 8.1, 10
• Microsoft Windows Server 2008 R2 SP1/2012/2012 R2/2016/2019
• Microsoft .NET Framework 4.7.2
• Approximately 150 MB SSD/HDD for installation
• 60 GB SSD/HDD free space for usage (this should be reviewed regularly once up and running to ensure capacity for log files is 3 x the size of your log folder)
• TCP/IP connection
• Impero recommends the server is not installed on a Domain Controller
• Powered to support the relevant number of client devices as follows:
• Maximum group allowance per Impero server 1200

Device specification for console users (Windows/Apple Mac)

Make sure your console user devices meets the following demands:

• Microsoft Windows 7, 8, 8.1, 10 (x86 and x64)
• Apple Mac OSX 10.12+ Operating Systems
• Microsoft .NET Framework 4.7.2
• TCP/IP connection
• 5 GB SSD/HDD free space
• Powered to support the relevant number of client devices as follows:
• Maximum group allowance per Impero server 1200

Device specification for staff machines

Make sure that your staff devices meets the demands relevant to their operating system:

Proxy and firewall configuration

For Impero workplace Pro to operate correctly,  it is necessary that you apply the following rules to your firewall, filter and/or a proxy:

*XXX is the number of clients x2 +20
 **1024-65535 is for WebRTC connections where STUN is used so both ends are effectively outbound