When you create a new Advanced Policy of any type, it is by default set to “Disabled”. You can choose to either “Enable” it, or “Schedule” it.

 

When you have chosen to “Schedule” a policy, you will see a “New Schedule” button become active.



 http://cdn.imperosoftware.com/knowledgebase/edupro/console/group/schedule-policy.jpg


Click on “New Schedule” to set the times at which you wish to enable this policy.


You will see each day of the week listed on the left-hand side, with 24 blocks for each day – one representing each hour. Click on the hours during which you wish to enable the policy. Enabled hours will display green.



 http://cdn.imperosoftware.com/knowledgebase/edupro/console/group/scheduled-policy.jpg




Click “Set” to save your changes, or “Unset” to remove any blocked hours.


You can click in individual blocks to break the schedule down further into five minute intervals.



 http://cdn.imperosoftware.com/knowledgebase/edupro/console/group/policy-interval.jpg




Once your schedule is set, your chosen policy will become active at the times you have specified.